How To Measure For Electric Fireplace Insert? guide for 2022

While having a fireplace in your house is appealing, you probably don’t want to deal with cleaning a chimney, obtaining fuel, fussing with a damper, or removing ashes from the fireplace. 

If you don’t want to deal with the hassle of maintaining a traditional fireplace, a MagikFlame electric fireplace can be the answer. You’ve probably got a few questions regarding electric fireplaces, such as what they’re good for, what to look for, and how to measure for one. We have the information you need.

Best Way How To Measure For Electric Fireplace Insert in 2022

If you’re looking for a simple DIY project, installing an electric fireplace is the job for you if you have carpentry and electrical understanding. 

Suppose you’ve never worked with electricity before. In that case, it’s recommended to hire a professional electrician to help you install an electric fireplace since a power outlet will be required in the opening of your old fireplace. 

Because electricians already know how to measure for an electric fireplace insert, they will be able to build and install the freestanding plug-in fireplace with ease.

There are a few things to keep in mind when it comes to clearance requirements for your electric fireplace. There are no minimum clearance requirements to the floor since electric fireplaces may be installed on a combustible surface without any fireproofing. 

However, there must be at least one inch between the back and sides of the electric fireplace and the surrounding walls, as well as the rear wall. 

It also requires two inches of combustible or non-combustible material from the top of the frame to the mantel board, as well as 3/8 of an inch of combustible or non-combustible material from the top of the firebox.

This means you can’t hang streamers, stockings, other decorative objects, or even garments directly in front of or over the fireplace. Regardless of the absence of possible embers, you should never set furniture now in front of an electric fireplace.

If you have prior carpentry or electrical knowledge and want to install the electric fireplace yourself, you will need a few pieces of equipment and supplies. 

You’ll need gloves to protect your hands, as well as a measuring tape to verify the fireplace is in the proper position. You’ll also need a level to ensure that the fireplace isn’t installed at an angle, no matter how minor.

A hammer, a saw, pliers, drill, and a Phillips screwdriver are other equipment you’ll need to install a fireplace insert quickly and easily. You’ll also need construction items, including non-combustible caulking, wall finishing, and frame. 

Some non-combustible caulkings may withstand temperatures ranging from 240 to 2000 degrees Fahrenheit. When selecting non-combustible caulking, ensure it complies with both the International Building Code (IBC) and the International Residential Code (IRC) fire-resistance criteria.

What Are the Differences Between Electric and Traditional Fireplaces?

The aroma of burning wood is the most compelling reason to use a fireplace. Fires have been used to keep people warm, cook their food, and create a feeling of security for thousands of years. While we no longer need fire to cook our food or keep us safe, the sight and smell of a fire in the fireplace soothe and warms us.

A fireplace insert is much less expensive than a standard fireplace. You must not only worry about substantial wall building and masonry work, but you must also install a chimney if you do not already have one.

You may mount a fireplace insert on a wall or in a recessed location to create the illusion of a real fireplace. There’s always the risk of embers from the fire flying out of the fire and igniting a fire on a rug, carpet, or furniture with an existing fireplace.

Electric Fireplaces Have a Lot of Advantages

The electric fireplace is the way to go if you’re worried about energy efficiency. According to the Environmental Protection Agency, classic open fireplaces lose 90% of their heat via the chimney and other vents. 

You may find that you’re toasty near the fire, but the rest of the room is more fantastic with a cast-iron wood-burning fireplace.

Electric fireplaces are classified as supplementary heating, which means they may help you save money on your energy bills. All you need for an electric fireplace is a working electricity outlet nearby. You must carefully design a wood structure that will enable a fire to burn, as well as kindling, in a wood-burning fireplace.

The fire may not ignite at all or immediately, but you must continue to fuel it by adding wood every several hours. There’s also no need to worry about the fireplace smoking the home.

Another advantage is that you won’t need a gas connection if you don’t want to use a natural gas fireplace, which uses either propane or natural gas. If you pick an electric fireplace, you won’t have to worry about fumes since carbon monoxide influences indoor air quality and your health, regardless of how much heat it produces.

Electric fireplaces, unlike other fireplaces, are less prone to rust and corrosion.

Other fireplace kinds, in addition to soot and a buildup of minute ash particles, rust, and corrosion, survive fewer years than electric fireplaces or at least seem much older than they are. After installation, electric fireplaces operate and run like new, and you won’t even need to bother about venting.

Do Electric Fireplaces Require Vents or a Chimney?

You’ll need a chimney or a vent whether you have a brick fireplace or a natural gas fireplace since both produce emissions. Electric fireplaces do not produce emissions. Thus there is no need for a chimney or a direct vent to the outside. 

If your property presently includes a chimney with a fireplace opening, you have the option of having the fireplace and chimney removed or just having the vent closed.

There are a few things to consider before removing the old brickwork and flue. The original builders may have signed or dated the bricks, indicating that your chimney has historical or monetary worth. 

If you don’t want to dismantle your chimney because of its historical significance, you’ll need skilled masons and chimney sweeps to preserve it in good working order. 

You may choose to seal the chimney to preserve its aesthetic value in such a situation. A chimney liner, which protects chimney walls from heat and corrosion, may also have to be removed.

If you do decide to have your chimney removed, you should factor in the expense of hiring a professional to do it. To minimize structural harm to your property, brick chimneys must be deconstructed brick by brick. As a result, removing your chimney will take longer, which means you’ll spend more money if you employ expert aid.

What to Look for When Purchasing an Electric Fireplace?

Before buying an electric fireplace based on price or look, there are a few things to think about. One of the factors to consider before determining how to measure for an electric fireplace insert is the size of the area for which you intend to give extra warmth. An infrared quartz unit is the best option if your space is about 900 square feet.

A forced fan fireplace is a preferable alternative if the size is less than 500 square feet. Any heater’s heating effectiveness drops dramatically if your space is more excellent than 1,600 square feet. Remote controls and a thermostat are also included with electric fireplaces. Our coil heaters produce up to 4,000 BTUs, which is a lot of heat.

Windows, draughts, high ceilings, and inadequate insulation are all variables that affect the heating effectiveness of an electric fireplace. 

Windows that are energy efficient not only hold heat in the house for longer, saving heating expenses, but they also minimize condensation. The right amount of insulation may also help your house stay warmer for longer.

Before you install a MagikFlame electric fireplace, ask yourself these questions:

Q1: What if this is my first time installing a recessed electric fireplace?

All MagikFlame Electric Fireplaces come with easy-to-follow installation instructions. The buyer’s handbook advises against plugging the log set into a power strip since it will demand too much power when other products are put into the power strip, overloading the breaker. Our electric fireplace works on conventional 110 volts, much like Dimplex fireplaces, but you can hardwire it into your power supply and connect it to existing J-boxes.

Q2: What Are the Electric Fireplace’s Dimensions?

Our electric fireplaces have a height of 31.723 inches, a width of 28.167 inches, and a depth of 12 inches. Our electric fireplaces have a 22.4671-inch 28.1107-inch broad aperture and a 0.722-inch lip. The depth of the base is 12 inches.
The concealed panel measures 9.097 inches high and 27.250 inches broad, with the top 9 inches sealed in. The viewing hole is 28.160 inches in diameter and 22.7 inches in height. The wall framework, which serves as the insert’s foundation, is 28.167 inches by 31.723 inches by 12 inches.

Q3: Is there a warranty from Magikflame?

All fireplace inserts come with a one-year manufacturer limited warranty. Because we use high-quality components, our inserts are made to last. 
Our inserts include no moving components, making them much more dependable than those that involve revolving LEDs and an electric motor. Because we employ LED and LCD technology, you’ll never have to worry about lightbulbs going out. Both LED lighting and LCD technologies have a reputation for being energy-efficient and long-lasting.

Final Verdict:

In this article, we have discussed how to measure for electric fireplace insert.

You may also use the chatbox to communicate with a representative or call us. If you have any further questions concerning our model types, you can contact us through email. We recognize that not everyone has the financial means to purchase an electric fireplace upfront, which is why we’ve teamed up with Bread.

Leave a Comment